[vc_row][vc_column width=”1/1″][vc_column_text]
Pulse Jet Filter Systems
[/vc_column_text][dt_gap height=”20″][/vc_column][/vc_row][vc_row][vc_column width=”1/4″][vc_single_image image=”197″ alignment=”center” img_link_target=”_self” img_size=”full” el_class=”imgborder”][/vc_column][vc_column width=”3/4″][vc_column_text]
Filter Concept is manufacturer of Pulse Jet Dust Collection system for various Industries requirement for air quality improvement and enhancing the quality of air released by collecting dust and other impurities from air or gas by removing particulate matter from the air and environment. We are a manufacturer of highly customized units to accurately match your Application requirements with customized ducting solutions along with our dust collectors for your specific dust collection requirements.
Construction :
Cartridge Housing, Baffle Plate, FILTER Bags, Sequential time controller, Solenoid Valve, Compressed Air Header, Safety Valve, Drain Valve, Pressure Gauge, Acrylic Manometer.
[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”1/1″][dt_gap height=”15″][/vc_column][/vc_row][vc_row][vc_column width=”2/3″][vc_column_text]
The dirty or contaminated air enters the dust collector through the inlet and passes through a number of filter cartridges/Bags (before the contaminated Air passes through the Filter Bag/Cartridge; baffle plate works as a protecting layer to control/retain heavy particles, which protects filter bags/cartridges to get in touch with heavy particles and damage caused by it) which retain the dust particles on the exterior surface while allowing clean air to pass through the outlet. As the collector operates, the collected dust begins to form dust cake, which eventually diminishes the porosity of the filter cartridges. As the pressure drop increases the ventilation volume of the collector decreases.
To maintain a moderate pressure drop, the cleaning cycle is employed to provide continuous cleaning of the filter Bags/cartridges. The cleaning system consists of a Sequential time controller, which actuates Solenoid Valve and the Compressed Air Header. These Compressed Air Header momentary burst or pulse of high pressure compressed air through the blow pipe into the filter tube. This Pulse of air creates reverse flow of air, which expands the filter cartridges to remove the collector dust.
The cleaning procedure occurs on a row‐by‐row basis therefore only a fraction of total filter air is interrupted for cleaning allowing continuous ventilation.
The dust cake when pulsed from the filter cartridges falls directly into the bucket at the bottom where it is removed.
[/vc_column_text][/vc_column][vc_column width=”1/3″][vc_column_text]
Features & Benefits :
- Easy to operate and Handle
- Easy to install & remove
- Low consumption of compressed air (for cleaning)
- High Filtering efficiency even for the finest dusts
- Filter media selection as per application
- Accessories as per client’s request
Applications :
- Pharmaceuticals
- Powder & Coating
- Chemicals
- Cement
- Metals & Minerals
- Steel & Power
[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”1/1″][dt_gap height=”20″][vc_column_text]
Air Intake Filter Systems
[/vc_column_text][dt_gap height=”20″][/vc_column][/vc_row][vc_row][vc_column width=”1/4″][vc_single_image image=”201″ alignment=”center” img_link_target=”_self” img_size=”full” el_class=”imgborder”][/vc_column][vc_column width=”3/4″][vc_column_text]
TURBINES, ENGINES, CENTRIFUGAL FANS, BLOWERS, & COMPRESSORS are common equipment for Industrial utility. They intake atmospheric air for its further operations. If moisture, dust, and varieties of solid particulate are present in the intake air, such contaminants can build up on the internal components such as valves, impellers, rotors, and vanes of the compressor, Turbines, Engines, Centrifugal Fans, Blowers . Such build-up can cause premature wear and reduce the efficiency. Therefore, it is recommended to install AIR Intake filters to avoid atmospheric dust particles coming with Air.
Construction :
“FILTER CONCEPT“ make Air intake filters are designed to meet required level of filtered air for Turbines, Engines, Centrifugal Fans, Blowers, & Compressors. They are constructed of Filter Housing, Air Filter Element and Weather Hood.
Air Intake Filter housings are constructed of Heavy Gauge Mild Steel sheet channel, Plate and sheet. Filter housings are supply along with flanged outlet connection having drilling of flanged as per ANSI B-16. 5. Internal and external surface of Filter Housing are preliminary coated with red oxide followed with final coat of synthetic enamel RAL 7035.
[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”1/1″][dt_gap height=”15″][/vc_column][/vc_row][vc_row][vc_column width=”1/2″][vc_column_text]
Air Intake Filter Element-Panel FIlters
Panel filters are used in industries to retain particles ranging from 1 micron to 50 micron. These filters are basically air intake filters, which is working with negative pressure of systems.
Primary (Panel) filters are used for coarse filtration for removal of particles in range of 1 to 50 microns. Primary filters retain coarse particles to avoid further loading on secondary filters & enhance the life of secondary filter. Primary filters are cleanable in nature to obtain good shelf life.
Features & Benefits :
- Low pressure drop due to pleated configuration
- Easy to install
- No bypassing
- Washable & reusable
- High dirt holding capacity
- Good mechanical strength
- Retrofit to any standard make
[/vc_column_text][/vc_column][vc_column width=”1/2″][vc_column_text]
Technical Specifications :
Configuration
- Flange type
- Box type
Filter media
- HDPE Media
- Synthetic Fiber Media
- Spun bonded polyester media
Applications :
- Turbines
- Centrifugal Fans
- Engines
- Blowers
[/vc_column_text][/vc_column][/vc_row]